----- Original Message -----
From: Tracy Crook <lors01@msn.com>
Date: Tuesday, August 5, 2003 1:00 pm
Subject: [FlyRotary] Re: Cooling / Pressure recovery

>
> There is quite a bit more but here is the key
part.   Use an extra
> airspeedindicator to measure the pressure at
various places around
> the heat
> exchangers, especially the 'front' side.
>

Tracy, this is just such a way cool idea!!  It
wouldn't take much work at all to run a bunch of
temporary 1/4" ID platic tubes to points all over
the plane and cowl, with the ends all terminating in
a nice row on a block of wood.  With a brass insert
fitted to a piece of tube coming out of the AI that
would allow the AI to be switched between any of the
various ends, a survey of relative pressure across
and within the entire ship can be made in a single
flight.