|
This is hopefully my
final design for my fuel system.
1. Use Andair duplex
valve and mount to floor with extension. The 10 has a console.
2. Use (expensive) Y
blocks to reduce bends and provide sensor ports.
3. Filter before and
after pumps.
4. Auto fail over
circuit to switch on second pump at 28 psi.
5. High pressure
bleeder.
6. 3/8 lines.
7. All cabin fuel
plumbing mounted to plate on floor.
8. Firewall
bulkheads on cool side of engine.
The pressure drop
and flow rate of the AC Delco Filters is unknown...AC Delco will not provide
specifications. Will need to measure.
This is the same
basic configuration the EGG's are running so it should provide a larger group of
planes with this design in the air sooner.
Flame
away!!
Bobby
Hughes
|