Received-SPF: none
 receiver=logan.com; client-ip=66.163.169.223; envelope-from=prvt_pilot@yahoo.com
Reply-To: <prvt_pilot@yahoo.com>
From: "Steve Brooks" <prvt_pilot@yahoo.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Rotary Canard - was home again
Date: Wed, 4 May 2005 21:05:28 -0400
Message-ID: <008401c5510e$87be6100$6401a8c0@workgroup.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit
In-Reply-To: <list-932334@logan.com>
Importance: Normal

Al, & Buly,
I have considered cutting down the prop some.  Especially after John clipped
his while landing.

Steve

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Bulent Aliev
Sent: Wednesday, May 04, 2005 12:10 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Rotary Canard - was home again


On 5/4/05 12:03 PM, "Al Gietzen" <ALVentures@cox.net> wrote:

> Subject: [FlyRotary] Re: Rotary Canard - was home again
>
> Hi Paul,
> I'm running a 72" 3 blade Ivo Magnum (ground
> adjustable), which isn't known for it top end speed,
> but since I didn't know what ptch I needed, it seemed
> to a really good place to start.
>
> Steve:
>
> Might you be carrying a bit too much prop?  My Catto is 66" diameter for
265
> hp 3-rotor on a Velocity, and gets me about 5300 static WOT.  I've got 85
> pitch, but of course you can adjust yours.  Blades are different, of
course,
> but; perhaps the tips of the IVO would tolerate some trimming.
>
> Just a thought.
>
> Al

Steve, I agree with Al. Also the max. recommended prop size for the CZ is
70"
Buly


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html