-------------- Original message from "George Lendich" <lendich@optusnet.com.au>: -------------- Kelly. I picked-up a second hand set of pulley, timing wheel and pick-up for $100 Aust - new cost was about $170 for Pulley/Timing wheel and $93 Aust for pick-up. Mine was off a Mazda demonstrator engine and didn't have much use. The timing wheel is attached to the pulley by bolts through the pulley. I don't know why you have to buy them together! I will know more when I get them. But the way to go, I believe George (down under) Yes. Tracy ----- Original Message ----- From: Kelly Troyer To: Rotary motors in aircraft Sent: Tuesday, April 05, 2005 12:16 PM Subject: [FlyRotary] Re: Timing Tracy, Can the RX-8 Crank sensor option be retrofit to existing EC-2's ? --Kelly Troyer Dyke Delta/13B/RD1C/EC2
Yes. Tracy ----- Original Message ----- From: Kelly Troyer To: Rotary motors in aircraft Sent: Tuesday, April 05, 2005 12:16 PM Subject: [FlyRotary] Re: Timing Tracy, Can the RX-8 Crank sensor option be retrofit to existing EC-2's ? --Kelly Troyer Dyke Delta/13B/RD1C/EC2
----- Original Message ----- From: Kelly Troyer To: Rotary motors in aircraft Sent: Tuesday, April 05, 2005 12:16 PM Subject: [FlyRotary] Re: Timing Tracy, Can the RX-8 Crank sensor option be retrofit to existing EC-2's ? --Kelly Troyer Dyke Delta/13B/RD1C/EC2