Mailing List flyrotary@lancaironline.net Message #19857
From: <wrjjrs@aol.com>
Subject: Re: [FlyRotary] P port runners
Date: Wed, 06 Apr 2005 19:47:02 -0400
To: <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Looks good Jerry! The method I use for soft tube is to make a wood plug with a oversize hole saw and sand the round down on the belt sander until it fits tight. The cut goes right thru the wood.
 
Bill Jepson 
 
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster