Received-SPF: none
 receiver=logan.com; client-ip=216.254.136.21; envelope-from=aouellet@icecanada.com
From: "Alain Ouellet" <aouellet@icecanada.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Oil Flow
Date: Sat, 26 Mar 2005 19:54:32 -0500
Message-ID: <OAEPLHHPHIIALAFHGAJKGEPKCMAA.aouellet@icecanada.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-822727@logan.com>

Wendell

There is a blockage in the line, suggest to check all including filter line,
oil intake screen if there is one anything in the line.... that could have
been sucked into it.

Good luck with the troubleshooting.

Iceman (2 to 3 weeks before the deal goes thru?....)

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
Behalf Of Wendell Voto
Sent: March 26, 2005 12:58 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Oil Flow


Couldn't get oil flow in the engine the other day when trying to fill oil
line to oil cooler and see if oil flowed to the filter. Had used gasket and
Halomar when assembling pick-up tube to engine, still no flow. Can't see why
it will not prime. Pulled oil line off and pumped oil into hole to prime the
pump since it had set for a long time since engine assembly; it spit out the
oil put in there showing that the pump would work but still didn't suck,
rather it does 'suck'.  Should I have used Ultragray instead of the Halomar?
 Any suggestions?
Will put a 3/8" extender on pick-up tube after oil flow is confirmed with
stock set-up (using sandwich mount 1/2" thick like CC mount).
Wendell


>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html