|
|
Posted for Rino <lacombr@nbnet.nb.ca>:
Attached is a picture that shows an open port in my engine. Bruce
said this would be used to return oil from the oil cooler / filter.
Hi Rusty,
You have to use that port for the oil return from the cooler because
that feed the oil to the whole engine. From that port it goes to the
oil filter then to the rotors and shaft.
You may be able to use the original banjo fitting on that port because
of the restricted space caused by the motor mount. The banjo fitting is
18 X 1.5mm. The banjo filling is restrictive and not ideal but it may
be easier than redo the motor mount.
Rino
|
|