|
Message
I will have to measure it, Wendell. I took an
aluminum extrusion that is basiclly a 2" x 6" hollow piece that is somewhere
around 20 in inches long, and had aluminum caps welded on both ends (which made
a box). I then had 1/2 inch thick x 1inch square aluminum blocks welded onto the
outside of the tank where I wanted to put fittings, and drilled and tapped these
for 1/4" npt. Very strong and simple. Will search my computer for a
picture. Paul Conner
----- Original Message -----
Sent: Saturday, February 12, 2005 11:49
AM
Subject: [FlyRotary] Re: More wild ideas
was Re: [FlyRotary] Re: To Paul SOme diagnosis thoughts
Bottom
posted..to Paul
Subject: [FlyRotary] Re: More wild
ideas was Re: [FlyRotary] Re: To Paul SOme diagnosis thoughts
Hi, Rusty....it only holds about 1 1/2
gallons. Paul
What are the dimensions of the sump
tank? I plan on putting one in my Cozy.
Wendell
message.
Checked by AVG Anti-Virus.
Version:
7.0.300 / Virus Database: 265.8.7 - Release Date: 2/10/2005
>> Homepage:
http://www.flyrotary.com/
>> Archive:
http://lancaironline.net/lists/flyrotary/List.html
No virus found in this incoming message.
Checked by AVG
Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.7 - Release Date:
2/10/2005
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.7 - Release Date: 2/10/2005
|