Mailing List flyrotary@lancaironline.net Message #1691
From: <13brv3@mchsi.com>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: RE: [FlyRotary] Re: injector wiring harness / JP Sorensen parts
Date: Tue, 20 May 2003 22:28:18 -0400
To: <flyrotary>

I recall getting some from SR Motorsports, Brentwood CA (near
Sacramento).  They are Mazda racing specialists.  925-516-7382.

Al
--------------

===>  I just emailed SR Motorsports, and asked about the connectors, so
we'll see what they say.  I asked specifically about plugs for my injectors,
and also generally about others, since I know Tommy is looking for some too.
If they answer, I'll let the group know.  

BTW- I looked at the MSD site, and they only seem to show the connectors
that I bought for my MSD secondary injectors, which will not fit the stock
Denso injectors that I have.  They may of course have others that aren't
shown.

For the record, I'm not THAT desperate for these connectors.  I have a few
good used ones that should work fine.  If I can find new ones though, I'll
sure use them.  

Thanks again for all comments.

Rusty (not dispensing hot coolant with any luck)

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster