Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Tue, 20 May 2003 22:28:18 -0400 Message-ID: X-Original-Return-Path: <13brv3@mchsi.com> Received: from sccmmhc02.mchsi.com ([204.127.203.184] verified) by logan.com (CommuniGate Pro SMTP 4.1b6) with ESMTP id 2356987 for flyrotary@lancaironline.net; Tue, 20 May 2003 20:58:06 -0400 Received: from rad (12-218-74-116.client.mchsi.com[12.218.74.116]) by sccmmhc02.mchsi.com (sccmmhc02) with SMTP id <20030521005802mm200eva44e>; Wed, 21 May 2003 00:58:02 +0000 Reply-To: <13brv3@mchsi.com> From: <13brv3@mchsi.com> X-Original-To: "'Rotary motors in aircraft'" Subject: RE: [FlyRotary] Re: injector wiring harness / JP Sorensen parts X-Original-Date: Tue, 20 May 2003 19:58:03 -0500 X-Original-Message-ID: <000501c31f34$08ea5040$0201a8c0@rad> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.4510 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 In-Reply-To: I recall getting some from SR Motorsports, Brentwood CA (near Sacramento). They are Mazda racing specialists. 925-516-7382. Al -------------- =3D=3D=3D> I just emailed SR Motorsports, and asked about the = connectors, so we'll see what they say. I asked specifically about plugs for my = injectors, and also generally about others, since I know Tommy is looking for some = too. If they answer, I'll let the group know. =20 BTW- I looked at the MSD site, and they only seem to show the connectors that I bought for my MSD secondary injectors, which will not fit the = stock Denso injectors that I have. They may of course have others that aren't shown. For the record, I'm not THAT desperate for these connectors. I have a = few good used ones that should work fine. If I can find new ones though, = I'll sure use them. =20 Thanks again for all comments. Rusty (not dispensing hot coolant with any luck)