Since the only sets that MSD makes with the LS1 coils end sockets are factory made for specific engines, I talked directly to the MSD tech rep and he offered to send the LS1 ends at no charge, so I could put them on a "universal" set from a retailer.  If you are going this route, call MSD at 915-855-7123 and them you need the LS1 coil ends for your wires.

 

Al Gietzen

-----------------

 

I found this message in the archives (can you tell I like having archives <g>).  It was extremely helpful, but I have some additional info to add.  I called MSD, and asked about wires with LS1 ends, and they confirmed that they only made them for specific engines.  The rep asked how long I needed the wires to be, and I told him about a foot.  He searched through the records, and found a part number MSD-32829, which is the 8.5mm super conductor wire set for a V8 truck.  All the wires are one foot long, with works perfectly for me.  This set is red, and was in stock at Summit for about $55.  There is also a new black set with the part number of MSD-32823, but Summit didn’t list those yet.  This was really about the last thing I needed, so I should be good to go, and even have a spare set. 

 

Cheers,

Rusty