Return-Path: <n3773@comcast.net>
Received: from sccrmhc11.comcast.net ([204.127.202.55] verified)
  by logan.com (CommuniGate Pro SMTP 4.2b8)
  with ESMTP id 335580 for flyrotary@lancaironline.net; Tue, 27 Jul 2004 08:05:50 -0400
Received-SPF: error
 receiver=logan.com; client-ip=204.127.202.55; envelope-from=n3773@comcast.net
Received: from rv8 (c-24-21-140-241.client.comcast.net[24.21.140.241])
          by comcast.net (sccrmhc11) with SMTP
          id <20040727120510011007j43de>
          (Authid: n3773@comcast.net);
          Tue, 27 Jul 2004 12:05:20 +0000
Message-ID: <001201c473d1$fbd22970$f18c1518@rv8>
Reply-To: "kevin lane" <n3773@comcast.net>
From: "kevin lane" <n3773@comcast.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-335543@logan.com>
Subject: Re: [FlyRotary] Battery location on an RV
Date: Tue, 27 Jul 2004 05:05:04 -0700
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441

in retrospect I wished I had installed more conduit down the firewall and
under the battery box to allow easier installation of wires.  I found the
need for a number of circuits and the only other route is thru that bulkhead
at the main spar.  I have my strobe power, landing lights, fuel pump, cig
lighter power and antennae wires running thru there, as well as flaps, gps
power(9v) and wish I had room for flap position switches.  I would suggest
finding a large plastic plug for the batt box which can be easily removed to
jump the battery after you forget to shut off the master!  you will have to
cut part of the underside of the batt box at the firewall so that the
conduit can make the bend.
Kevin Lane  Portland, OR
e-mail-> n3773@comcast.net
web-> http://home.comcast.net/~n3773
(browse w/ internet explorer)
----- Original Message ----- 
From: "Dana Overall" <bo124rs@hotmail.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Tuesday, July 27, 2004 4:00 AM
Subject: [FlyRotary] Battery location on an RV


> For you RV guys, will the standard location of the Van's battery box cause
> any interference issues as I move along with the engine install?
>
>
>
> Dana Overall
> Richmond, KY i39
> RV-7 slider, Imron black, "Black Magic"
> Finish kit
> 13B Rotary. Hangar flying my Dynon.
> http://rvflying.tripod.com/aero1.jpg
> http://rvflying.tripod.com/aero3.jpg
> http://rvflying.tripod.com/blackrudder.jpg
> do not archive
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html