<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
HI ,  i have done this on a IV-P .   i do not see any reason to ever remove
the rear seat and top bulkhead .
 you can still access all the parts and gear cylinders.
it saves a lot of work from the way the manual shows to install these.
just remember to leave out a window or top bulkhead until after you have
finished the door and latch system , so you can get out when doing the door
latch pads.....marty


-----Original Message-----
From: freemen@mediaone.net <freemen@mediaone.net>
Date: Friday, May 11, 2001 3:54 PM
Subject: LNC4-P Presure Bulkhead Installation

>I am considering bonding in the Rear Seat back & top presure bulkheads.
SNIP
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>