Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 774706 for rob@logan.com; Mon, 07 May 2001 01:20:31 -0400 Received: from smtp7.gateway.net ([208.230.117.251]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71175U5500L550S0V35) with ESMTP id com for ; Mon, 7 May 2001 01:13:34 -0400 Received: from f3g6s4 (1Cust246.tnt2.coeur-dalene.id.da.uu.net [63.20.49.246]) by smtp7.gateway.net (8.9.3/8.9.3) with SMTP id BAA00160 for ; Mon, 7 May 2001 01:20:17 -0400 (EDT) Message-ID: <000a01c0d6b5$d9c70f60$f631143f@f3g6s4> Reply-To: "dfs" Reply-To: lancair.list@olsusa.com From: "dfs" To: "Lancair list" Subject: rivet countersink Date: Sun, 6 May 2001 22:23:27 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Joe: If you already have the Microstop basic tool, ACS lists the various pilots and cutters that should fit it. Buying just the pilot and cutter, as needed, isn't all that costly. ACS lists quite a few variations, so you need to know which unit you have. the Microstop tool does look kinda large, but should allow installation of the applicable 100 degree cutter and associated pilot. ACS also lists 120 degree cutters, so heads up! Dan Schaefer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>