Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.4.5) with ESMTP id 774628 for rob@logan.com; Sun, 06 May 2001 21:22:52 -0400 Received: from swan.mail.pas.earthlink.net ([207.217.120.123]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71175U5500L550S0V35) with ESMTP id com for ; Sun, 6 May 2001 19:01:54 -0400 Received: from jenny (pool-63.53.21.188.ipls.grid.net [63.53.21.188]) by swan.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3) with SMTP id QAA03163 for ; Sun, 6 May 2001 16:08:38 -0700 (PDT) Message-ID: <000c01c0d657$e3bc6f50$bc15353f@jenny> From: "Joe Trepicone" To: Subject: rivet countersink Date: Sun, 6 May 2001 19:10:51 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Hi everyone, I'm look for a good rivet countersinking device. I have been using the anchormate kit, which has worked very well, but I need to replace the countersinking bit and don't want to purchase an entire kit. I also have a microstop/countersink cutter kit but the cutters seen to large for small rivets that we commonly use, plus I'm not sure the cutting angles are the same. Any ideas would be appreciated. Joe Trepicone >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>