Message-ID: <003101c0d285$6ec288e0$f3db1b18@cfl.rr.com>
From: "Ted Noel" <tednoel@cfl.rr.com>
To: <lancair.list@olsusa.com>
Subject: ski tube
Date: Tue, 1 May 2001 17:26:49 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
    I have a variation on the shelf on the BH at the hydraulic pump. My =
L-IV-P does not have a solid bulkhead at the aft part of the normal bag =
area, but a cargo net. (A 6-BID CF "roll bar" has been added there to =
supply stiffness that would have been supplied by the BH. I have a full =
floor aft cargo area that can ordinarily accept a large stuffed animal =
or so. Over the elevator compensator mount is a protective box for my =
Sierra Flight Systems AHRS unit. This has a rubber pad on the top.=20
    In order to completely prevent anything from getting through the net =
into the aft control and servo area, I have a door that extends the far =
aft BH vertically. It flops down onto the AHRS box by the pull of a =
cable situated just aft of the cargo door. Skis lay on top of that door, =
and are bungeed in place. The cargo net snugs around the skis to secure =
the aft area from CG destroying stuff.
    It's actually very simple, and didn't take all that long to make.

Ted Noel
http://www.bibleonly.org
tednoel@cfl.rr.com


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>