Return-Path: <lancair.list-request@olsusa.com>
Received: from hotmail.com ([216.33.237.110]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-71175U5500L550S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Sun, 25 Mar 2001 17:26:03 -0500
Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC;
	 Sun, 25 Mar 2001 14:35:14 -0800
Received: from 208.14.41.27 by lw7fd.law7.hotmail.msn.com with HTTP;	Sun, 25 Mar 2001 22:35:14 GMT
From: "Ed Sikora" <planeman23@hotmail.com>
To: lancair.list@olsusa.com
Subject: Jeffco Fuel tank sealer and peel ply...
Date: Sun, 25 Mar 2001 22:35:14 -0000
Message-ID: <F110r8pkpLkTgbLYluL0000b2d6@hotmail.com>
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

<x-flowed>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Was just about to apply the Jeffco Fuel Tank Sealer to the inside of my 
header tank and forward deck but have a question.  I want to apply some peel 
ply to the forward deck where the baffles will lie to allow bonding of the 
tops of the baffels to the deck.  Does the Sealer act like the epoxy as far 
a peel ply goes...can you pull the peel ply off after curing and have a nice 
surface for bonding?  And do you apply the peel ply after the second coat of 
sealer or with the first?

Thanks in advance.

-Ed Sikora
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
</x-flowed>