<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
For Doug Waddingham.

Doug, I arranged to locate my NuPro valve very close to the vertical part of
the lower part of the panel and then, with some careful plumbing bends,
clamped the aluminum pipe to the fiberglass (next to the pilot's right knee)
on each side of the valve. The valve itself isn't clamped but the pipe on
each side, within about 2 inches on either end of it, is. I've had mine this
way for nearly 500 hours with nary a hitch.

Dan Schaefer

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>