<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I called the factory.  They said that reaming was the best option.  I
suggested that I insert as many bolts a possible and then ream the next hole
until the bolt fit (after removing the bracket).  Then ream the next one and
on until all were in their respective holes.  This meant a lot of installs
and removals, but I figured it would keep the confusion down about which way
to ream which hole.  They also said that I should try to fill the slop in
the holes with flox if possible.  The only way I can see to do this is on
the final install, insert the bolts, fill the holes with flox using a
Popsicle stick, apply the nut and torque.

I'm new to the list.  So I don't know how the factory handles this type of
"I said, you said".  With that said...Mark, if this is not correct, you
won't hurt my feelings or my project by correcting it here.

Steve Richard
steve@oasissolutions.com
ES


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>