Return-Path: Received: from marvkaye.olsusa.com ([205.245.9.239]) by truman.olsusa.com (Post.Office MTA v3.1.2 release (PO203-101c) ID# 0-44819U2500L250S0) with SMTP id AAA22091 for ; Mon, 19 Oct 1998 01:44:27 -0400 Message-Id: <3.0.3.32.19981019014235.00d3cc10@olsusa.com> Date: Mon, 19 Oct 1998 01:42:35 -0400 To: lancair.list@olsusa.com From: "William T Bartlett" (by way of Marvin Kaye ) Subject: Re: Long Straight Cuts Heatglue/marker pens X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> >From: Ed McCauley : Long Straight Cuts > >To make long straight cuts, heat glue a metal ruler to the surface to be >cut and run the "wand >plate" down it like a router guide. TaTa long straight cuts. I have yet to find a way to remove heat glue from prepreg, epoxy and paint won't stick to it. While on this subject of disappointments I have also noted that marker pen will often bleed through various layers of paint. If you use marker in areas to be painted, make sure that you get every last trace off with lacquer thinner. Bill N7WB