Return-Path: <lancair.list-request@olsusa.com>
Received: from marvkaye.olsusa.com ([207.30.195.131]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-70783U4500L450S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Sat, 17 Feb 2001 00:16:50 -0500
Message-Id: <5.0.2.1.2.20010217002546.043dbec0@olsusa.com>
Date: Sat, 17 Feb 2001 00:26:16 -0500
To: lancair.list@olsusa.com
From: "Angier M. Ames" <alphadog@nii.net> (by way of Marvin Kaye <marvkaye@olsusa.com>)
Subject: Re: DH hydraulic lines
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

<x-flowed>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Ted,

DH will make up one end of the line with their typical swaged fitting and 
prepare
the other end for you with compression fitting parts and it's a very good
solution. Just feed the line through whatever small opening you need and then
apply the compression fitting and you're done.

Angier Ames

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
</x-flowed>