<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Skip, Rob and Jim,
I am following Brent's lead and am using the DHI flex lines with #4 AN
female ends.  I ordered six lines: 2 ea 36", 2 ea 60" and 2 ea 96" for the
full run.  I plan to route thru the gear box fwd wall (with hyd lines) and
fwd to firewall.
I forgot about Matco parking brake valve but will incorporate later on.
My gear leg pivot pins are TIGHT.  I heated with my gun and drove with brass
drift and rivet gun.  Now I need a big press.  Brent says his were not so
tight.
Cost for six lines: $508.00.  Ouch!  Cheaper than a spin out any day.
For info on DH 400 High Pressure Flexibla Tubes see their web site:
www.dhinstruments.com
and down load the four page brochure.  The line weighs 16 gr/m and is small
dia. with great bend radius of 15/16" at press.
Walter Dodson,  IV-P keeps getting delayed with new stuff



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>