Given my recent exhaust failure, I have a need to fabricate a set of stainless clamps (2) which would rigidly hold the tail pipes just forward of the
firewall. These clamps would then be supported with a direct connection to the motor. These clamps would be suitable for any 235/320/360 with the crossover
exhaust 1.75" dia that terminates with two tailpipes side by side. So, my question to this group is whether there would be interest among you for having a set
of clamps. If 15 of you expressed interest, a 30 clamp order to my local machine shop might produce a reasonable price.
So let me know if you have interest. If not, I'll machine a set for myself on my Bridgeport but if done in a CNC environment, would be more economical for a decent size batch order.

Angier Ames
N4ZQ