<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I can affirm the following quote from Charlies e-mail
----- Original Message ----- >
> 1.  << The Continental-Lycoming with Hartzel/MT has been accepted as a
> 25-hour combination and 100NM radius as reasonable (150NM with turbine).
>>
>

Charlie Cotton from the Seattle MIDO office approved my Lycoming 360 F1A6
with the 3 blade MT prop for 25 hours.  H also stated it was a certified
combination.  I also modified the engine with a Lycon B1A sump modified for
forward feed with Air Flow Performance fuel injection.  That motor is
pressure carburated.  Makes no difference for certification.  The FAA is
concerned about reciprocating parts and their combinations, ( which were
stock in my situation).  I was grateful.
Bob Smiley
N94RJ
rjsmiley@tscnet.com
>


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>