X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 21 Oct 2013 12:29:00 -0400 Message-ID: X-Original-Return-Path: Received: from p3plsmtpa08-03.prod.phx3.secureserver.net ([173.201.193.104] verified) by logan.com (CommuniGate Pro SMTP 6.0.7) with ESMTP id 6549274 for lml@lancaironline.net; Mon, 21 Oct 2013 12:18:54 -0400 Received-SPF: none receiver=logan.com; client-ip=173.201.193.104; envelope-from=jayph@fastairplane.net Received: from shuriken ([69.92.48.82]) by p3plsmtpa08-03.prod.phx3.secureserver.net with id fsJG1m0091mPo4M01sJKNs; Mon, 21 Oct 2013 09:18:20 -0700 From: "Jay Phillips" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] Re: GAMIjector installation on TSIO 550 X-Original-Date: Mon, 21 Oct 2013 09:18:09 -0700 X-Original-Message-ID: <000901cece79$24a2b250$6de816f0$@fastairplane.net> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000A_01CECE3E.78449DA0" X-Mailer: Microsoft Outlook 14.0 Thread-Index: AQIE4zEFaUpXyUERGFp5HXe8snrHxpmTKliA Content-Language: en-us This is a multipart message in MIME format. ------=_NextPart_000_000A_01CECE3E.78449DA0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I also just purchased Gamijectors for my IV-P/TSIO-550. I collected detailed info prior to the purchase. And they will be installed in the next week or so. I'll collect post-installation data and submit my results. Pre-installation, my GAMI lean test showed 0.7 gph difference between first and last to lean. Not terrible, but it should be below 0.5 according to GAMI. Operating lean of peak I saw 65-70 dF difference between the hottest and coldest CHTs. I'd like that to be a lot closer. Jay Phillips From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of William A. Hogarty Sent: Monday, October 21, 2013 8:46 AM To: Lancair Mailing List Subject: [LML] Re: GAMIjector installation on TSIO 550 John: Please post results after you replace your injectors. Thanks, Bill Hogarty On Mon, Oct 21, 2013 at 7:38 AM, Ron Laughlin wrote: John, Order this socket that is custom made for the task: Ron On Mon, Oct 21, 2013 at 6:40 AM, John Barrett wrote: Hello All, I recently acquired a set of GAMIjectors for my TSIO 550 in N31VP. I am trying to install them and it appears I'm going to have to remove the intake stacks to be able to access the injectors. Is this correct or is there a trick or tool I don't know about? If I do have to remove the intake pipes, do I need to replace the gaskets for the pipes when they go back in? What is the torque for the three hold down nuts on the intake pipes? Thanks in advance. Regards, John Barrett, CEO Leading Edge Composites PO Box 428 Port Hadlock, WA 98339 www.carbinge.com ------=_NextPart_000_000A_01CECE3E.78449DA0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

I also just purchased Gamijectors for my IV-P/TSIO-550. I collected = detailed info prior to the purchase. And they will be installed in the = next week or so. I’ll collect post-installation data and submit my = results.

 

Pre-installation, my GAMI lean test showed 0.7 gph difference between = first and last to lean. Not terrible, but it should be below 0.5 = according to GAMI. Operating lean of peak I saw 65-70 dF difference = between the hottest and coldest CHTs. I’d like that to be a lot = closer.

 

Jay Phillips

 

From:= = Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of = William A. Hogarty
Sent: Monday, October 21, 2013 8:46 = AM
To: Lancair Mailing List
Subject: [LML] Re: = GAMIjector installation on TSIO 550

 

John:

 

Please post results after you replace your = injectors.

 

Thanks, Bill Hogarty

 

On Mon, Oct 21, 2013 at 7:38 AM, Ron Laughlin <ronlaughlin@gmail.com> = wrote:

John,

Order = this socket that is custom made for the = task:

 


Ron

 

On Mon, Oct 21, 2013 at 6:40 AM, John Barrett <jbarrett@carbinge.com> = wrote:

Hello = All,

 <= /o:p>

I recently = acquired a set of GAMIjectors for my TSIO 550 in N31VP.  I am = trying to install them and it appears I’m going to have to remove = the intake stacks to be able to access the injectors. =  

 <= /o:p>

Is this = correct or is there a trick or tool I don’t know about?  If I = do have to remove the intake pipes, do I need to replace the gaskets for = the pipes when they go back in?  What is the torque for the three = hold down nuts on the intake pipes?

 <= /o:p>

Thanks in = advance.

 <= /o:p>

Regards,

 <= /o:p>

John = Barrett, CEO

Leading = Edge Composites

PO Box = 428

Port = Hadlock, WA 98339

 <= /o:p>

www.carbinge.com

 <= /o:p>

 

 

------=_NextPart_000_000A_01CECE3E.78449DA0--