From: Sky2high@aol.com
Message-ID: <7d.a253093.26ecd7bd@aol.com>
Date: Sun, 10 Sep 2000 08:25:33 EDT
Subject: Rudder Cables
To: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Because of the many turns in the Lancair suggested rudder guide placement 
scheme, there is a great deal of friction -- even more so if the optional 
co-pilot side rudder pedals are installed.  For some people, this is a 
benefit because the in-flight friction is great enough to keep the rudder 
trimmed in cruise flight (it stays where you put it).  

Some of us ran the cable guides as straight as possible, such as along the 
elevator pushrod tunnel walls with the crossover in the tunnel, exiting just 
aft of the nose gear well.  This results in a very low friction system 
requiring rudder trim, usually a bendable tab to optimize cruise trim.

Leading Edge Air Foils (LEAF) has an online catalog
 < http://www.leadingedge-airfoils.com/ >
and is a supplier of ultralight kits and components.  They have an 
inexpensive device which seals the cable and guide at one end and provides a 
port to inject lubricant down the guide to the open end.  I believe they also 
have a recommended lubricant for SS cables.

Scott Krueger
N92EX

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>