lml@lancaironline.net Mailing List Archive

High side to low side leak in one of your actuators. Put it on jacks and lift the gear. Disconnect them and plug them up one by one to determine which one and then rebuild it. The mains are easiest to remove. The nose is a pain unless you have long arms.

Matt

Sent from my iPhone

On May 24, 2013, at 5:17 AM, <marv@lancair.net> wrote:

Posted for RV Driver <rvsocal@gmail.com>:

Hello LML

I am a new lancair 360 owner and wanted to ask a question

I have a random cycling of the landing gear hydralic pump which runs for
about 1 sec every 1 min. I checked the fluid level and it is fine and I
can see no obvious leaks

Any Ideas ??

Roger

[Welcome aboard, Roger. Sounds like you have a leaky dump valve... I'm sure other members will be suggesting additional likely alternatives, but this is a classic that has come up many times in the past. I'm confident the LML will help get you through it.... hang in there. <marv> ]
--

For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html