Return-Path: <lancair.list-request@olsusa.com>
Received: from hotmail.com ([216.33.236.178]) by ns1.olsusa.com
          (Post.Office MTA v3.5.3 release 223 ID# 0-64832U3500L350S0V35)
          with ESMTP id com for <lancair.list@olsusa.com>;
          Mon, 14 Aug 2000 20:47:04 -0400
Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC;
	 Mon, 14 Aug 2000 17:52:58 -0700
Received: from 204.215.229.85 by lw7fd.law7.hotmail.msn.com with HTTP;	Tue, 15 Aug 2000  GMT
From: "ED SIKORA" <planeman23@hotmail.com>
To: lancair.list@olsusa.com
Subject: LC-235 Flap actuator length
Date: Tue, 15 Aug 2000 00:52:58 GMT
Message-ID: <F300rjbudzxxfYXFrwi000001a4@hotmail.com>
X-Mailing-List: lancair.list@olsusa.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

<x-flowed>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Hi there:

I was just bonding in the 235's Flap Weldment Phenolic Tabs and wanted to do 
a preliminary adjustment on the travel for the actuator (haven't started my 
wings yet).  Has anyone taken pin-to-pin measurements of the actuator in 
both the 8 deg reflex and 20 deg position?  Alternatively if you could 
describe where your limit switches (both retract and extend) are on the 
adjustment arm I'll take it from there (maybe measured from the motor 
housing or some other refrence).

Thanks in advance.

-Ed Sikora
planeman23@hotmail.com
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
</x-flowed>