Thanks to everybody who took time to respond. I've concluded it's normal wear and tear. I've known I should be doing the SID 97-3E at each condition inspection, but somebody with the setup has been hard to come by. I think I'll buy 3 good quality gauges (skip the $$ differential pressure gauge) and give it a go. On the other hand, the G900X has accurate digital fuel pressure, MAP, and fuel flow gauges...so maybe I can just use the EFIS for the adjustments. Comments?
To further convince myself it's simple wear and tear, I plotted more parameters from the last 470ish operating hours (FlightData.jpg). No sudden events, just the avg and max in-flight fuel pressures and flow have been trending downwards.
thanks
Isaac
N7842K
From: "Isaac Heizer" <ijheizer@comcast.net>
To: lml@lancaironline.net
Sent: Monday, July 30, 2012 7:44:54 AM
Subject: TSIO 550E Low Fuel Pressure: Adjust or Repair?
My ES-P with a TSIO 550E, 660 hrs since new, no longer reliably idles unless the electric fuel pump is running on low. This is
new behavior in the past 10 hours or so. The engine is stock except for GAMIs and was originally set
up to SID 97-3E but the fuel system hasn't been touched since then.
It's apparent from the G900X's fuel pressure display that the idle fuel
pressure is too low, and we can most likely readjust the pressures back
to spec. But my question is "is the low idle pressure simply normal
wear and tear, or is something abnormal happening?"
I plotted the minimum idle fuel pressure for the last 450
engine operating hours (MinimumIdleFuelPressure.jpg). Each marker is the minimum fuel pressure during a single flight
while the engine was idling at start of the flight. I defined idle as engine running for at least 45 seconds, RPM
between 700 and 1000 RPM, and oil temperature 120 degrees
or cooler. It's clear to me the minimum idle pressure has been slowly
declining for the entire time, but it started a steeper drop about 100
hours ago.
I plotted the minimum fuel pressure during
climb, when the boost pump was likely off (MinimumClimbFuelPressure.jpg). Each marker is the minimum fuel
pressure during a single flight. I considered data points where the RPM was between 2450 and
2550, MAP between 29 and 32, and altitude below 9000' -- I think these
are likely times when I had not activated the boost pump. I don't see
anything weird about this plot, other than the minimum pressure has been
rising (?)
Neither my mechanic nor I really know the wear pattern
for the mechanical fuel pump and related assemblies. I really want to
conclude that we can simply adjust the fuel pressure back to spec and keep
flying. But there is so much expertise on this forum, I'm wondering if
anybody has better advice.
Thanks
isaac heizer
N7842K