John
Turbo Alley in Ada Oklahoma has a baffle system design with the back baffle having this hat built already into it.  I have only been told about it and have not seen it yet.  I'm thinking about buying that one piece and replace the one I got from Lancair.

LarryE
Legacy & still building

From:	"John Barrett" <jbarrett@carbinge.com>
To:	lml@lancaironline.net
Date:	05/26/2012 02:34 PM
Subject:	[LML] hot #2 Cyl  TSIO 550 revisit
Sent by:	"Lancair Mailing List" <lml@lancaironline.net>

---

Hello all,
 
In April I asked some questions about this issue of  managing the cooling flow for #2 cylinder and there was a prolific and enlightening response that helped a lot.  The most common piece of advice was to build what was termed a “hat box” in the forward wall of the oil cooler box to allow more air around the back and bottom of this cylinder.
 
Someone posted a photo of that fix and it was excellent.  Now I’m ready to go to work on this project and I’ve searched my data bases in different computers for that photo for a couple of hours to no avail.  I’m hoping that whoever was kind enough to post that picture will resend.
 
Thanks in advance.
 
Regards,
 
John Barrett, CEO
Leading Edge Composites
PO Box 428
Port Hadlock, WA 98339
 
www.carbinge.com