X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Tue, 14 Feb 2012 09:37:24 -0500 Message-ID: X-Original-Return-Path: Received: from fmailhost05.isp.att.net ([204.127.217.105] verified) by logan.com (CommuniGate Pro SMTP 5.4.4) with ESMTP id 5396089 for lml@lancaironline.net; Tue, 14 Feb 2012 09:27:14 -0500 Received-SPF: none receiver=logan.com; client-ip=204.127.217.105; envelope-from=bbradburry@bellsouth.net Received: from desktop (adsl-98-85-92-18.mco.bellsouth.net[98.85.92.18]) by isp.att.net (frfwmhc05) with SMTP id <20120214142638H05005t5uhe>; Tue, 14 Feb 2012 14:26:38 +0000 X-Originating-IP: [98.85.92.18] From: "Bill Bradburry" X-Original-To: "'Lancair Mailing List'" References: In-Reply-To: Subject: RE: [LML] Re: Canopy Crud X-Original-Date: Tue, 14 Feb 2012 09:26:41 -0500 X-Original-Message-ID: <62B7A359427D4E1D9C25404FCC297764@Desktop> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook 11 Thread-Index: AczrF39VHlXz1m5LR5G7ByBiOPSlAgADR9eA X-MimeOLE: Produced By Microsoft MimeOLE V6.0.6002.18463 Try Goo Gone. B2 -----Original Message----- From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Greenbacks, UnLtd. Sent: Tuesday, February 14, 2012 7:51 AM To: lml@lancaironline.net Subject: [LML] Re: Canopy Crud Going back through the archives I found several entries relating to how best to remove tape adhesive residue along the paint line of the canopy frame. In this instance, the adhesive residue is from 3M Scotch Blue painter tape. If you look on the inside of the tape roll, it actually says in very fine print to remove the tape within 14 days. Of course, no-one in their right mind bothers to read the fine print so my tape stayed in place for about 2 years while I went about other construction activities. So fast forward to this week and I have some dry and crusty adhesive residue to deal with. Hot soapy water and isopropyl alcohol had no effect. Acetone and Windex as well a lot of other stuff will damage the plexiglass surface....which brings me to the question...what is the material used for our canopy glass and windows? Is it plexiglass, Lexan, polycarbonate, etc.? Do these words all describe the same material that came with our kits way back when? Does anybody know with certainty what works and what doesn't? Some suggest using kerosene, WD40, lighter fluid, who knows for sure? Amonia and water? Citrus based cleaners? Any help would be appreciated. Angier Ames N4ZQ -- For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html