Mailing List lml@lancaironline.net Message #60771
From: Colyn Case <colyncase@earthlink.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Steam Gauge Backup
Date: Thu, 19 Jan 2012 10:55:27 -0500
To: <lml@lancaironline.net>
Brent,   Not sure what you meant by OR

Did you mean you are okay with certified efis and no spinning mass? 

Or did you mean you must have certified efis AND spinning mass?

Sent from my iPhone

On Jan 19, 2012, at 9:01 AM, Brent Regan <brent@regandesigns.com> wrote:

Not my system. Please note my post was quoting Ed Gray.

As a developer of certified PFDs, MFD, ADAHRS, MSUs, etc. I agree with Michael.

If you plan to fly IMC without a spinning mass backup OR a certified EFIS then you are "Dead Man Flying".

I have destroyed too much equipment during per-qualification testing of certified equipment and have done too many post crash analysis for the NTSB to have any other opinion.

Regards
Brent Regan

On 1/18/2012 6:11 PM, Michael Newman wrote:
Your dual systems are running the same software. Which (in my opinion as a
developer of such software) is the MOST LIKELY point of failure in the
system.


Ed Gray writes: "I have no steam gage backups.  With dual screens, 
backup batteries and dual ADHRS I feel that I have enough redundancy.  
Does anyone have input or comment?  This plane may be one of the first 
with no round gauges anywhere."(sic)


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster