From: RWolf99@aol.com
Message-ID: <44.5523a32.269cb94e@aol.com>
Date: Tue, 11 Jul 2000 13:54:22 EDT
Subject: RE:  Injected Lycomings
To: lancair.list@olsusa.com
CC: olsen@eai.com
Reply-To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Dan -

I've been talking to Orin about this issue recently.  He tells me that they 
have a 90 degree elbow available that is made by Airflow Performance (of, I 
think, Spartanburg SC, or is it NC?) that allows the injector to be 
appropriately relocated.  Orin tells me that this part is NOT available thru 
Vern, but IS available through Lancair.  Don't know why they're keeping it a 
secret from Vern, but there you have it.

Orin describes this as a bolt-on part -- no welding or machining required.

I'd appreciate your tracking this down and advising us.  I'm about to order 
an engine from Lancair, too.  Since I have to borrow money to do it, I 
figured I'd pony up the extra $$$ and get an IO-360-B1F.

- Rob Wolf
rwolf99@aol.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>