|
|
Dan, if your using these with the PSD switches;
http://www.automationdirect.com/static/specs/prosenseswitches.pdf
Note that there is a 1.8 A, 75ms inrush current not covered by the specs. I’m not saying it wont work, but…
Regards, Bill Hannahan
--- On Thu, 3/31/11, Dan Ballin <dballin@gmail.com> wrote:
From: Dan Ballin <dballin@gmail.com>
Subject: [LML] Gigavac relays
To: lml@lancaironline.net
Date: Thursday, March 31, 2011, 1:24 PM
Gigavac makes a low amp draw contactor I think it is the "TA" variety, but draws about
90ma. I have the GX11 contactor rated for about 150amps. Web stie: http://www.gigavac.com/products/contactors/datasheets/gx11/index.htm
By the way - they are a great company to deal with. I originally bought the reg contacotr and they exchanged it out for the high efficiency one at no charge. Dan Ballin
|
|
|