| Wayne,
Jack H Webb who lives in Ohio owns, test flies and trains in a few of the Lancair models. Jack was a production aircraft test pilot and is an excellent instructor. You might want to see if he would fly down to your place to do the necessary airwork. Jack can be reached at: home 419-399-5500, mobil 260-750-7477.
I had a boat in Slidel during Katrina. I have flown between Detroit and Slidel many times.
Good Luck and Good Training, Lorn
On Dec 2, 2010, at 2:54 PM, wayne tassin wrote: Lorn, thanks for responding I am in Alexandria,La. right in the center of the state my phone :318-452-3313 > From: lorn@dynacomm.us> Subject: Re: lancair 360 training and retrofitting right side rudder > Date: Thu, 2 Dec 2010 07:13:56 -0500 > To: wtassin@hotmail.com> > Wayne, > > Where are you located? > > Lorn > > > From: wayne tassin < wtassin@hotmail.com> > > Date: November 30, 2010 4:16:03 PM EST
> > To: lml@lancaironline.net
> > Subject: lancair 360 training and retrofitting right side rudder
> >
> >
> > As a low time 172 pilot I have looked at hpat for training in my 360 which I hope will be finished by early summer of 2011.
> > Geees was I shocked. First, no way would I attempt to do the maiden voyage or fly the 25hrs of restriction time with my
> > experiance which brings me to hpat. Second, the hpat rep tells me he has to train me in my airplane which is not complete
> > and he has to have rudder pedals on the right side which I did not install.
> >
> > So what it looks like is I will need hpat to fly the 25hrs off and retrofit the right side pedals which look to be all but impossible
> > and then train me.Please give me your thoughts or ideas on this situation.
> >
> > Thanks, Wayne Tassin
-- Lorn H. 'Feathers' Olsen, MAA, ASMEL, ASES, Comm, Inst LNC2, FB90/92, O-320-D1F, 1,750 hrs, N31161, Y47, SE Michigan
|