|
|
FYI,
prop clearance will increase by roughly double the amount of the spacer as the nose gear is about half way between the prop and mains..
Randy Snarr
--- On Tue, 8/17/10, Bill Bradburry <bbradburry@bellsouth.net> wrote:
From: Bill Bradburry <bbradburry@bellsouth.net>
Subject: [LML] Re: LNC2 Nose gear fork spacer
To: lml@lancaironline.net
Date: Tuesday, August 17, 2010, 5:56 AM
If you are looking at a 0.5 inch fix, your
prop may be too big! There is not much difference in prop clearance in a half
inch!
Bill B
From:
Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of TOM GARDINER
Sent: Monday, August 16, 2010
12:56 PM
To: lml@lancaironline.net
Subject: [LML] LNC2 Nose gear fork
spacer
Does anybody have a CAD drawing for an
AL 0.5 inch spacer to be installed at the
bottom of the nose gear fork to increase prop ground clearance? Or anybody know
the distance between centers on the wheel bracket mounting bolts (4) and
the radius of the flange at the rod end of the fork?
|
|
|