Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Sun, 30 May 2010 09:54:28 -0400
Message-ID: <redirect-4330775@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=65.75.24.102; envelope-from=bgray@glasair.org
From: "Bruce Gray" <bgray@glasair.org>
Subject: RE: [LML] Low Pressure Gear Switch Needed
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Importance: Normal
In-Reply-To: <list-4330622@logan.com>

This is what I use for up/down pressure control on my GIII. It's an
adjustable solid state pressure switch. Last one on the page.

http://www.automationdirect.com/adc/Search/Search?searchquery=3Dpsd25&cmd=
=3D
Search&fctype=3Dadc.falcon.search.SearchFormCtrl&TxnNumber=3D-1


Bruce
www.Glasair.org=20

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Tom McNerney
Sent: Sunday, May 30, 2010 1:09 AM
To: lml@lancaironline.net
Subject: [LML] Low Pressure Gear Switch Needed

I am helping with a new prototype that has a gear system similar to a
LNC2 or Legacy.=A0 We are trying to get=A0it flying so we can make =
Oshkosh
this year.=A0 We recently ran into a bit of a holdup.=A0 The PS550 low
pressure switch for the landing gear system is on back order with
Lancair for at least 1 month.=A0 This would not leave us enough time to
test the gear system before the show.=A0 Does anybody know of an =
alternate
source for this pressure switch?=A0 Or, anybody have an extra to sell?
Rent? Loan for a month? :)

Thanks for your help.
Tom
dudewanarace@yahoo.com
www.N54SG.com=20

--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html