I'm building an ES-P, so maybe my spar attachment points are in a different place.

 

With my seat in the rear position on the rails that cantilever it back, to maintain the proper angle for the center seat belt attachment points provided with the AmSafe seatbelts the attachment point needs to be pretty much in the middle of the rear floor (just like it shows in the AmSafe installation instructions).  Likewise, to make sure the airbag on the lap belt stays near the center of your lap with the belt at the right angle, the side attachment point needs to be on the floor back about 4 to 6 inches from the spar.  Attached is a photo of the attachment brackets installed in my plane.

 

Pete

 

 

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]
Sent: Wednesday, April 28, 2010 3:01 AM
Subject: lml Digest #3011

 

        Lancair Mailing List Digest #3011

 

 1) Re: Amsafe airbags

    by Colyn Case <colyncase@earthlink.net>

 

This digest is sent to you because you are subscribed to

  the mailing list <lml@lancaironline.net>.

For archives and help click http://mail.lancaironline.net:81/Lists/lml/List.html

LML website: http://www.lancaironline.net/maillist.html