Posted for Skip Long
<skiplong@videocomm.com>:
Pete,
address your e-mails to:
Lancair Mailing List
<lml@lancaironline.net>
that's all there is to it.
Thanks
skip
[Just be sure that
the email address in your "FROM" box is pete@leapfrogventures.com, the same as your subscribed address, otherwise your posts will never make it to the
queue. Check out the Users' Guide on the LML website for complete instructions and lots of additional great info on how to get the most out of
the LML. <Marv> ]
On Apr 25, 2010, at 10:11 PM, Pete Sinclair wrote:
>
Attached are photos of the mounts (black brackets on the floor with the AN
>bolts through them). Note the air inflation canister
mounted to the right of
>the side mount in photo 2.
>
> The center hard point is in the middle of the rear
floor. No way around
>that.
>
> You can’t move them, because the receptacles and belts are sized for floor
>mounts, not for the standard Lancair mounts (believe me, I tried to get the
>standard mounts to work), and they are not
adjustable.
>
> BTW, how does one go about posting on the forum?
>
> Pete
>
>
From: Skip Long [mailto:skiplong@videocomm.com]
> Sent: Sunday, April 25, 2010 1:28 PM
> To: Pete Sinclair
> Subject: Re: Amsafe
airbags
>
> Thanks for the info Pete.
> That's what I was afraid of. I don't understand why they can't
> go on the
existing hard points. My aircraft is finished with a nice interior.
> don't want to start ripping up the floor. Does the new hard-points
interfere
>with the rear passengers feet?
>
> Thanks again.
> Skip
>
>
>
>
On Apr 25, 2010, at 9:15 AM, Pete Sinclair wrote:
>
>
> Sorry, but I haven’t figured out how to post replies on the
forum.
>
> I just installed the Amsafe airbag seatbelts in my ES-P. The attachment
>points are
different. You need to build re-enforcement points into the floor.
> They do not work with the connection points in the spar
box. I can take
>photos of the attachment points if you are interested.
>
>
Pete
>
>
> <seat belt mounts 2.jpg><seat belt mounts
1.jpg>
|