Mailing List lml@lancaironline.net Message #54853
From: John Hafen <j.hafen@comcast.net>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Re: Legacy maintenance idea
Date: Thu, 01 Apr 2010 11:38:59 -0400
To: <lml@lancaironline.net>
Velcro.  I'm sure velcro would be sufficient.  Just the peel and stick kind.  Or perhaps double sided sticky tape from Kit Components.

John Hafen


On Apr 1, 2010, at 3:26 AM, Jay M. Sabot wrote:

Tom,
 
This is a dangerous post!!!!
 
Someone new builder is going to believe this. Then there will be the inevitable fatal accident, and finally FOX news will report that it was your brilliant idea to reduce the maintenance time !!!
 
Jay Sabot.
 
Legacy N26XY
(lacking the Gourley wing-stub inspection mod)
 
 
 
 
 

From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of Tom Gourley
Sent: Thursday, April 01, 2010 12:49 AM
To: lml@lancaironline.net
Subject: [LML] Legacy maintenance idea
 
Posted:  April 1,2010
 
While working on my Legacy kit it occurred to me that once it's flying inspection
and maintenance of the main gear would be so much easier if the stub wing skin
could be removed.  I attached a hinge to the leading edge so that the skin could be 
opened as shown in the picture.  Now I'm trying to decide what sort of fasteners
I should use on the trailing edge.  Any suggestions?
 
Tom Gourley
 
 

 

Image
image001.jpg
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster