lml@lancaironline.net Mailing List Archive

Bill,

I have had good luck with the SCEET tubing for this. SCEET is basically double-walled SCAT and is much harder to cut/puncture.

Bob

From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of mikeeasley
Sent: Tuesday, February 09, 2010 8:40 PM
To: lml@lancaironline.net
Subject: [LML] Re: insulating scat tubing?

I used this stuff, it's a high temperature, reflective sleeve.

Radiant Heat Reflective Aluminized Sleeve for wire and hose protection

http://www.firesleeveandtape.com/aluminized-radiant-heat-reflective-fiberglass-sleeve.html

Mike Easley

Colorado Springs

In a message dated 02/08/10 13:11:32 Mountain Standard Time, cgainza@msn.com writes:

Bill,

I think you would have better luck with Zetex. Seems to help in my installation.

Craig,
IVP

From: marv@lancair.net
To:
Date: Mon, 8 Feb 2010 13:14:48 -0500
Subject: [LML] insulating scat tubing?

Posted for billhogarty <billhogarty@hughes.net>:

Some time ago, there was a discussion on the merits of insulating the scat
tubing in the pressurization system on a L-IVP.

I have located some thin adhesive backed aluminum tape and wonder if this
would be suitable for the application.

Any comments or suggestions?

Thanks, Bill Hogarty
--



For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
=