|
Bryan
I would think you would want that shoulder attach
point on the aircraft frame( if seat comes loss). There is a safety
report floating around that says the angel of the
strap as
it comes over your shoulder should be between 17
and 30
degrees( those numbers are about correct)
above straight
back, to protect against compression of the
Spin.
Art
----- Original Message -----
Sent: Sunday, March 15, 2009 3:54
PM
Subject: [LML] Seatbelts in Lancair
360
I am doing the interior on my 360 and originally I planned on
using the plans version of mounting the shoulder harnesses to the baggage
bulkhead. I am having second thoughts and want to get this sorted out quickly
before my interior is finished. I would like a 5 point rotary buckle system.
Currently I have it set up to have the shoulder harness be a "Y" and bolt to
the rear baggage bulkhead built in hardpoints per plans. This takes my seat
belts across the baggage area which could end up causing problems.
I would like to attach the harness to the seat back itself but I have a
box on the pax side that houses my hyd. pump and battery so it would make
installation here more difficult. I read an article that says Do Not mount
them on the ceiling.
Looking for ideas and advice. Also would like advice on where to get 5
point harnesses. I dont want Ebay motors seatbelts.
Bryan
|