Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Fri, 20 Feb 2009 13:51:00 -0500
Message-ID: <redirect-3502898@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=69.145.248.57; envelope-from=carbonflier@bresnan.net
From: David Standish <carbonflier@bresnan.net>
User-Agent: Thunderbird 2.0.0.19 (Windows/20081209)
MIME-Version: 1.0
Subject: Re: [LML] Re: Canopy Light
References: <list-3501785@logan.com>
In-Reply-To: <list-3501785@logan.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

billhogarty wrote:
> For David Standish:
>
> David:  I didnt want my "Door Open" light to be illuminated just 
> because the door was open so I have the light powered from the master 
> bus to the 3 pole door contactor, then down to the microswitch on the 
> internal side of the 2nd door handle.
> This turns the light on only when the master switch is on AND the door 
> is closed.  When the 2nd door handle is in the locked position, the 
> microswitch opens the circuit and the light goes out.  Pretty simple 
> and no relays needed.
> Regards, Bill Hogarty
>
> -- 
> For archives and unsub 
> http://mail.lancaironline.net:81/lists/lml/List.html
>
Great solution!  I also go through the door contactor to a micro switch 
on the door handle.   I am not pressurized and don't have a second latch 
to put a switch on.  My light circuit goes through an annunciator 
controller that controls and tests all the warning lights on the panel 
also the warning lights are LED's so they are unlikely to burn out.  
They relay I used was rated for about 100,000 cycles.

David