|
|
Please put me on the list.
I'm also an engineer with a CNC mill at home and would like to help out if
suitable.
Maybe I could do one of the parts.....
Mark Ravinski
----- Original Message -----
From: "LARRY ZELIADT" <lzeliadt@embarqmail.com>
To: <lml@lancaironline.net>
Sent: Friday, December 05, 2008 12:06 PM
Subject: [LML] Re: Reichel Trim Wheel - Good News
i would like one. thanks larry
----- Original Message -----
From: Wayne Bailey <waynnno@yahoo.com>
To: lml@lancaironline.net
Sent: Thu, 4 Dec 2008 23:25:03 -0500 (EST)
Subject: [LML] Reichel Trim Wheel - Good News
Hello All,
A good friend of mine and fellow pilot Dave Wyman helped Dick Reichel build
his 360. As many of you know Dick was killed in a crash back in the late
90's. Dick and another mutual friend Bill Daffron engineered an improved
elevator trim wheel system which many of you are using and which some have
expressed interest in installing.
As you can see from message below, Dick's widow kept the original drawings
and will make them available to the community, I will scan and upload these
as soon as possible- hopefully sometime next week.
She also has some parts and pieces (no inventory yet) from the original
production runs. Dave Wyman was involved in the original design and
fabrication and has offered to help put another production run together. No
costs yet but assuming the costs are reasonable, how many builders would be
interested in purchasing a Reichel complete system?
I include myself in the number. Sick of the original trim system.
Regards,
Wayne Bailey
10RD
Wayne
Hey,
On Thursday, Dick's widow Linda is going to give me the drawings and a bunch
of bits and pieces, for dfistribution to the needy.
She really is financially strapped, so whatever we can sell should be sold
for her.
I know of a talented guy (a former employee of mine) with a full machine
shop in his garage, who might want to produce a batch if they were presold,
and maybe give a cut to Linda, etc.
Maybe you could survey the needy guys out there in cyber-land and see how we
can get 'em flying?
Our bird is down with a burned-out flap motor.
Hi to Patty
Hi Dave,
Just fly to OXR/CMA with Patty today. Didn't land, just overflew. Had to get
back. Poor vis.
Love to see you and Dianne sometime soon. Been TOO long.
Re trim wheel - 320/360 is out of production. Doubt if there is market in
Lancair corporate for resale. It would be nice to put the drawings into
Lancair community for use as needed by pilots. Reduce efforts and errors on
reverse engineer. Make community safer.
If drawings are avail, I would be happy to scan and upload to the list
If any parts are avail, I am sure there would be a market. I would also be
happy to publish that to the list - suspect they would sell immediately.
Let me know.
Love to you both.
Wayne, Patty, and Lucy
PS Just sell-e-brated 4th wedding anniversary!!!! Does it get ANY easier?
w
--- On Sat, 11/29/08, D.Wyman <david.wyman2@verizon.net> wrote:
From: D.Wyman david.wyman2@verizon.net.
Subject: Fw: TRIM WHEEL
To: "wayne Bailey" <waynnno@yahoo.com>
Date: Saturday, November 29, 2008, 4:18 PM
Wayne,
I just got this reply- -where do we go from here?
DW
----- Original Message -----
From: LINDA SMITH REICHEL
To: david wyman
Sent: Saturday, November 29, 2008 11:23 AM
Subject: TRIM WHEEL
Hello Dave,
I have blue prints of the trim wheel, I kept them because I always believed
in the trim wheel design. I will be in Santa Barbara on Dec. 4th, Thursday.
I will bring them with me. As a matter of fact I have often thought of
selling the design to Lancair. Email me about what you would like me to do.
Love, Linda
--- On Sun, 11/23/08, david wyman <david.wyman2@verizon.net> wrote:
From: david wyman <david.wyman2@verizon.net>
Subject: Fw: Dick, Bill, & Dave's Trim Wheel
To: "LINDA SMITH REICHEL" <lreichel@sbcglobal.net>
Date: Sunday, November 23, 2008, 9:48 AM
Hi Linda,
I just received the message below from a flying buddy. do you know where we
can find the drawing for the trim wheels? Sems like the right thing to get
it out there for others.
Love,
Dave
----- Original Message -----
From: Wayne Bailey
To: Dave Wyman
Sent: Saturday, November 22, 2008 8:39 PM
Subject: Dick, Bill, & Dave's Trim Wheel
Dave,
Seems the trim wheel you guys is still the best tech.
Guys in Lancair builders groups are trying to reverse engineer.
Do you think there are any drawings or fixtures available from Bill's
efforts?
Would really help these guys out to put on the LML blog.
Bill and Dick would be proud no doubt.
Lets go flying in 10RD.
W
Forwarded Message: Re: [LML] Riechal Trim Wheel
Re: [LML] Riechal Trim Wheel
Thursday, November 20, 2008 8:51 AM
From:
ETLTYT@aol.com
To:
lml@lancaironline.net
Larry,
I have a Reichel trim system that I could loan you for the purpose of
reverse engineering. I'm still building and hope to fly next summer so would
like it back no later than spring time. If this sounds good to you send me
your address and number . I will get home next week and could send it then.
Let me know.
Kai Ogston
509 869 8685
One site has it all. Your email accounts, your social networks, and the
things you love. Try the new AOL.com today!
Forwarded Message: Re: Riechal Trim Wheel
Re: Riechal Trim Wheel
Thursday, November 20, 2008 8:51 AM
From:
"Gary Edwards" <gary21sn@hotmail.com>
To:
lml@lancaironline.net
Message contains attachments
Reichel Trim Wheel.jpg (38KB)
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|