Sender: <marv@lancaironline.net>
To:  lml@lancaironline.net
Date: Mon, 08 Dec 2008 14:07:44 -0500
Message-ID: <redirect-3342363@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=69.128.73.170; envelope-from=sbuller@emmett.org
Content-class: urn:content-classes:message
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Subject: RE: [LML] IV-P main gear door sliders gear door covers
In-Reply-To: <list-3334815@logan.com>
Thread-Topic: [LML] IV-P main gear door sliders gear door covers
Thread-Index: AclYHnz9yt30WRZNR+yD1HCOw5TVYgBIQ2fw
From: "Steve Buller" <sbuller@emmett.org>

Andre,

I have a pattern from the Lancair builders shop that I could mail to
you.  Also McMaster Carr has the material. I bought enough to make two
sets just incase I have the same problem your having.
One question.... Is your IVP an older kit with 1/8 sliders or the
updated 1/4?
Good luck, Steve=20

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net] On Behalf Of
Dr Andre Katz
Sent: Saturday, December 06, 2008 10:47 PM
To: lml@lancaironline.net
Subject: [LML] IV-P main gear door sliders gear door covers

time has taken its toll and the main gear sliders need renewal, the
material is perhaps not as strong as it should be (370 hrs) although it
might be.
anyone out there using a different product? Also I have since destroyed
the pattern but I suspect all IV-P slider patterns to be different.=20
any suggestions appreciated.
Andres

--
For archives and unsub
http://mail.lancaironline.net:81/lists/lml/List.html