Mailing List lml@lancaironline.net Message #49700
From: <vtailjeff@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] aleron trim tab
Date: Sun, 30 Nov 2008 09:20:44 -0500
To: <lml@lancaironline.net>
Brad,

I ended up riveting a flat plate of AL to the original tab to almost double the number of square inches of tab surface area. The builder's manual recommendation is too small. Also it helps to keep your wings balanced to within 10 gallons for trim reasons. Many aircraft have lateral fuel imbalance limitations for this reason--the Cirrus SR 22 is one.

Jeff


-----Original Message-----
From: Brad jepp <brad4666k@yahoo.com>
To: lml@lancaironline.net
Sent: Sat, 29 Nov 2008 6:51 pm
Subject: [LML] aleron trim tab

Can anyone give me some information on the size of their aileron trim tab. I 
used an 8 inch long piece of hinge. It seems like I need a little more mass, as 
fuel burns off on one side I do not have enough trim left. Its pretty effective 
most of the time. I installed per book for the LIV. Help!Brad


      

--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster