|
|
I have a spinner back plate that I purchased from Lance years ago.
Not sure if this is the one everyone is looking for.
It has 02/02 10031 printed on the back. I would have purchased it to fit an IO320. I think it is the same part for the 360.
I think I paid around $40 several years ago.
Randy Snarr
--- On Fri, 8/15/08, mmcmanus@grandecom.net <mmcmanus@grandecom.net> wrote:
From: mmcmanus@grandecom.net <mmcmanus@grandecom.net>
Subject: [LML] Re: Spinner Backplate Needed
To: lml@lancaironline.net
Date: Friday, August 15, 2008, 2:25 PM
Steve, it must be a fairly common problem on the 360s. Mine had the same issue
last year an annual time (at around 340 hours). Also, same
response from
Lancair. My A&P ended up fabricating a new one using the old one as a
template. He also beefed it up for additional support. I was unable to find
anyone with an extra at that time. Good luck.
Matt McManus
LNC2 360
Quoting Steve & Kelly Rosenzweig <krosenzweig@socal.rr.com>:
...on my 360 MKII and found the spinner backplate was terribly cracked...
--
For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
|
|
|