<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
In the LC235 building manual, in figure 191 Page 198 rev (6/86) a 3/16" shim
is shown under the forward edge of the rudder when bonding the 2 halves
together.  Does this shim extend all 48" of the length of the rudder or is
it just placed under the lower edge at the 8" point from the bottom (if so
it would seem like a set of shims to support the rudder at several points
during the bonding process would be more desireable)

Thanks in advance.

-Ed Sikora

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html
Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>