X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Wed, 21 May 2008 20:48:49 -0400
Message-ID: <redirect-2932897@logan.com>
X-Original-Return-Path: <tom.gourley@verizon.net>
Received: from vms173003pub.verizon.net ([206.46.173.3] verified)
  by logan.com (CommuniGate Pro SMTP 5.2.3)
  with ESMTP id 2931518 for lml@lancaironline.net; Wed, 21 May 2008 01:21:31 -0400
Received-SPF: pass
 receiver=logan.com; client-ip=206.46.173.3; envelope-from=tom.gourley@verizon.net
Received: from jacky0da39824a ([71.111.154.251]) by vms173003.mailsrvcs.net
 (Sun Java System Messaging Server 6.2-6.01 (built Apr  3 2006))
 with ESMTPA id <0K17004NLDDI8ZW1@vms173003.mailsrvcs.net> for
 lml@lancaironline.net; Wed, 21 May 2008 00:17:45 -0500 (CDT)
X-Original-Date: Tue, 20 May 2008 22:20:31 -0700
From: "Tom Gourley" <tom.gourley@verizon.net>
Subject: Re: [LML] Circuit Breaker Location
X-Original-To: "Lancair Mailing List" <lml@lancaironline.net>
Reply-to: "Tom Gourley" <tom.gourley@verizon.net>
X-Original-Message-id: <001701c8bb02$64d7c490$e712020a@jacky0da39824a>
MIME-version: 1.0
X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.3198
X-Mailer: Microsoft Outlook Express 6.00.2900.3138
Content-type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original
Content-transfer-encoding: 7bit
X-Priority: 3
X-MSMail-priority: Normal
References: <list-2931513@logan.com>

"Are there any regs that state where circuit breakers can be located? I have 
my hydraulic pump mounted on a bulkhead behind the co-pilot seat and would 
like to place the main hydraulic pump circuit breaker on the enclosure I've 
built around the pump."

I know of two flying Legacys with the hydraulic pump circuit breaker mounted 
exactly as you've described.  (They also have the pump mounted behind the 
co-pilot's seat.)  I don't think the location was specifically pointed out 
to the inspectors, but there were no issues raised over the location of the 
breaker.  I think this location makes a lot of sense as it minimizes the 
amount of heavy gauge wire required for the pump circuit.

Tom Gourley