X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Fri, 04 Apr 2008 10:53:34 -0400 Message-ID: X-Original-Return-Path: Received: from [64.12.137.3] (HELO imo-m22.mail.aol.com) by logan.com (CommuniGate Pro SMTP 5.2.1) with ESMTP id 2830164 for lml@lancaironline.net; Thu, 03 Apr 2008 00:49:31 -0400 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.3; envelope-from=Sky2high@aol.com Received: from Sky2high@aol.com by imo-m22.mx.aol.com (mail_out_v38_r9.3.) id q.cd4.290ebf7a (41811) for ; Thu, 3 Apr 2008 00:48:45 -0400 (EDT) From: Sky2high@aol.com X-Original-Message-ID: X-Original-Date: Thu, 3 Apr 2008 00:48:44 EDT Subject: VM EPI 800 Fuel Sys Question X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1207198124" X-Mailer: Unknown sub 34 X-Spam-Flag: NO -------------------------------1207198124 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Lancairians, There is a builder in FL that just received his airworthiness certificate for a 300 series Lancair. However, Marcel (_marcelbelleville@msn.com_ (mailto:marcelbelleville@msn.com) ) has one small problem - he is using a VM EPI 800 engine monitor with the fuel indication system and VM support does not have the switch used to calibrate the tanks. This switch plugs into the tank level display unit in order to provide for the display of the frequency related to the fuel quantity (later to be burned in a ROM). Does anyone have such a switch available? If so, could you contact Marcel directly at his email address listed above. Thanks, Scott Krueger **************Planning your summer road trip? Check out AOL Travel Guides. (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv00030000000016) -------------------------------1207198124 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
Lancairians,
 
There is a builder in FL that just received his airworthiness=20 certificate for a 300 series Lancair.  However, Marcel (marcelbelleville@msn.com) has o= ne=20 small problem - he is using a VM EPI 800 engine monitor with the fuel indica= tion=20 system and VM support does not have the switch used to calibrate the=20 tanks.  This switch plugs into the tank level display unit in orde= r to=20 provide for the display of the frequency related to the fuel quantity (later= to=20 be burned in a ROM).  Does anyone have such a switch available?  I= f=20 so, could you contact Marcel directly at his email address listed above.
 
Thanks,
 
Scott Krueger 



P= lanning your summer road trip? Check out AOL Travel Guides.
-------------------------------1207198124--